| |
- Each kit includes 2 cams and 4 lifters
- All cams are made for 99-06 Twin Cam 88™ (exc. 2006 Dyna)
- Cams are made for splined cam sprocket, 00-04 models can use stock gear and bolt assembly
1-3001CL Moderate Street, Cruising- Bolt-in. Mild performance for Dynas, Softails or single riders. Stock compression ratio or up to 9.5:1. Best power with performance air cleaner and free flow exhaust. Uses stock valve springs. Range: 1,500 to 5,500 RPM
1-3002CL Street Performance, Some Engine Modifications- Bolt-in. OK with stock compression but works best with up to 10.1:1 compression ratio. Best power with performance air cleaner and free flow exhaust. Uses stock valve springs. Range: 1,800 to 5,800 RPM
1-3004CL Max Hot Street, Modified- For modified engines. Higher compression, 10.5:1-up, big bore kits, head modifications, etc. Must use Crane valve springs, clearance for .600” lift. Strong mid-range torque with upper RPM power. Must use performance air cleaner and free flow exhaust. Range: 2,000 to 6,200 RPM
1-3005CL Hot Street Performance, Modified- For modified engines with 10.25:1-up compression, big bore kits, head modifications. Must use Crane valve springs, clearance for .600” lift. Must use performance air cleaner and exhaust. Designed for use with Edelbrock Performer RPM Twin Cam cylinder heads
- Range: 2,000 to 6,000 RPM
NOTE: See FITMENT GUIDE for specific application, optional accessories and other important information
NOTE: Use rear cam roller bearing assembly H-D# 8983
|
|
.jpg)
